home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
DATATION
/
PENPAL.LZH
/
README.1ST
< prev
Wrap
Text File
|
1991-03-13
|
7KB
|
184 lines
_____________________
PEN PAL - Versions 1.04
Registration fee: $25.00
Copyright 1989,90,91
ALL RIGHTS RESERVED
by
Micro Data Assist
2701-C, West 15th, #149
Plano, Texas 75075
(214) 736-3668
ENVIRONMENT:
--------------------------
MS-DOS 2.0 (or greater)
512k free memory
Monochrome (or color) monitor
Printer (any dot matrix)
Floppy or hard disk
MODIFYING THE ENVIRONMENT:
--------------------------
The 'PEN PAL' application program may require more intensive disk
utilization than other programs you are currently using. DOS permits
you to alter the environment to facilitate this intensive disk
utilization.
It is recommended that you create a CONFIG.SYS file (if the file is
not there already) which contains the following two statementes.
FILES=20
BUFFERS=8
DOS looks for the CONFIG.SYS file each time the computer is turned on
(or "re-booted"). When the file is found, the operating system alters
the environment corresponding to the contents of the file.
********************************
INSTALLING 'PEN PAL' ON SYSTEMS WITH A HARD DISK DRIVE:
--------------------------------------------------------
The diskette that your copy of 'PEN PAL' was distributed to you on
should not be used for running of 'PEN PAL'. You should first make
a back-up copy of the distribution disk and then install 'PEN PAL'
on either your hard disk or floppy disk system.
We recommended that you create a sub-directory that will contain the
'PEN PAL' program and distribution master files. The following DOS
commands will create a sub-directory called 'PENPAL':
C>CD\
C>MD\PENPAL
Once you have created the sub-directory, select the new sub-directory
by entering:
C>CD\PENPAL
Insert the 'PEN PAL' distribution disk into drive 'A'.
Next, copy the contents of your distribution disk on to your hard disk
by execuiting the following command:
C>COPY A:*.* C:
Remove your 'PEN PAL' distribution disk from drive 'A'.
Reboot your system in order to load the new values in your CONFIG.SYS
file.
Make your 'PEN PAL' sub-directory your current directory:
C>CD\PENPAL
Load 'PEN PAL' in order to initialize your data files.
C>PENPAL <return>
Upon completion of your system initialization you will be returned
to your system prompt. Reload 'PEN PAL' in order to start using it.
C>PENPAL <return>
********************************
INSTALLING 'PEN PAL' ON A DISKETTE
---------------------------------
The diskette that your copy of 'PEN PAL' was distributed to you on
should not be used for running of 'PEN PAL'. You should first make
a back-up copy of the distribution disk and then install 'PEN PAL'
on either your hard disk or floppy disk system.
In order to run 'PEN PAL' on a floppy disk system you will need two
disk drives. One drive to contain your program disk and the other to
contain your data files. ** NOTE - THERE IS NOT ENOUGH SPACE FOR BOTH
THE 'PEN PAL' PROGRAM AND YOUR DATA FILES ON THE SAME FLOPPY DISK. *
Insert the 'PEN PAL' distribution disk in drive 'A' and select the 'A'
drive by entering "A:" (return).
Insert a blank FORMATED DISK into drive 'B'. This is the disk that your
working copy of 'PEN PAL' will be copied to.
Enter the following command:
A>COPY A:*.EXE B:
Upon completion of this copy operation remove your disk from drive 'A'
and replace with the new program disk in drive 'B'.
Load a new diskette for data files into drive 'B'.
Reboot your system then execute PENPAL.EXE in order to initialize your
system.
Load 'PEN PAL' in order to initialize your data files.
A>PENPAL <return>
Upon completion of your system initialization you will be returned
to your system prompt. Reload 'PEN PAL' in order to start using it.
A>PENPAL <return>
********************************
MICRO DATA ASSIST DISCLAIMS ALL WARRANTIES RELATING TO
THIS SOFTWARE, WHETHER EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
AND ALL SUCH WARRANTIES ARE EXPRESSLY AND SPECIFICALLY
DISCLAIMED. NEITHER MICRO DATA ASSIST NOR ANYONE ELSE
WHO HAS BEEN INVOLVED IN THE CREATION , PRODUCTION, OR
DELIVERY OF THIS SOFTWARE SHALL BE LIABLE FOR ANY
INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE SUCH SOFTWARE EVEN
IF MICRO DATA ASSIST HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR CLAIMS. IN NO EVENT
SHALL MICRO DATA ASSIST's LIABILITY FOR ANY DAMAGES
EVER EXCEED THE PRICE PAID FOR THE LICENSE TO USE THE
SOFTWARE, REGARDLESS OF THE FORM OF CLAIM. THE PERSON
USING THE SOFTWARE BEARS ALL RISK AS TO THE QUALITY AND
PERFORMANCE OF THE SOFTWARE. Some states do not allow
the exclusion of the limit of liability for
consequential or incidental damages, so the above
limitation may not apply to you.
This agreement shall be governed by the laws of the
State of Texas and shall inure to the benefit of MICRO
DATA ASSIST and any successors, administrators, heirs
and assigns. Any action or proceeding brought by either
party against the other arising out of or related to
this agreement shall be brought only in a STATE or
FEDERAL COURT of competent jurisdiction located in
Collin County, Texas. The parties hereby consent to in
personam jurisdiction of said courts.
This is copyrighted software. You are not obtaining
title to the software or any copyright rights. You may
not sub-license, rent, lease, convey, modify,
translate, convert to another programming language,
decompile, or dissemble the software for any purpose.
You may make as many copies of this software as you
need for back up purposes. You may use this software on
more than one computer, provided there is no chance it
will be used simultaneously on more than one computer.
If you need to use the software on more than one
computer simultaneously, please contact us for
information about site licenses.
*******************************************************